ERTG Claims Service Banner
Biogas gas holder

Biogas Holders for Anaerobic Digestion Plants

Biogas gas holderProviding biogas holders for anaerobic digestion plants is a growing business sector. Every biogas plant has a gas holder in some form. In fact you can very often spot an Anaerobic Digestion Plant by the presence of its spherical dome, or cylinder and these can at times be very striking architectural features.

But how much do most people know about biogas holders? I would wager that even those involved in biogas companies often don’t realise what technology sits beneath those futuristic shapes, hence, the name of this article to emphasise that the best of those domes are packaged with ingenious devices to carry out their hidden function.

So, what is their hidden function?

Watch the video below and scroll down and read the article that follows and you will discover the hidden function of biogas holders.

That main function of biogas holders is to control the gas, both upstream and downstream, by applying an adequate driving force (pressure) to carry the biogas around the system at the required pressure and flow rate.

It is also, crucially, the device that provides the signals to equipment, to turn them on or off, and to raise signals or alarms. In this sense, the best biogas holders are more of a process instrument than a storage tank. That is because the biogas holder is the controlling system which governs the satisfactory operation of engines, boilers and/ or waste gas burners.

Traditionally, the materials used to construct gas storage vessels, or biogas holders, have been steel and concrete. Those have for many years been the two main types of gas holder which used to be seen on sewage treatment works AD Plants. The main types in those days were:

  1. Steel floating dome roof on top of the digester, with the biogas from the digestion process being contained under the digester roof, usually of mild steel, which could rise or fall depending on gas production and demand, much as the old town-gas gas holders used to rise and fall with the passage of night and day
  2. The bell-over-water type of gas holder, constructed in a similar way, but with the gas from the digester, which would in this case have a fixed roof, being piped to the biogas holder at ground level, This type usually had an inverted steel open-bottomed cylinder which would float in water held in a tank beneath it.

There are other types which were sometimes used, such as dry-seal gas holders, with a membrane giving a seal between an upper biogas holding tank and a lower tank structure. But these were usually found only in the biggest sewage works.

Biogas Holders that Use 21st Century Gas Holder Materials

As biogas technology has developed it has become more essential that gas storage is reliable, and low maintenance requirements are even more of an issue. The economic value and reliability of biogas holders is much more important now, as the value of the biogas itself rises.

Most of all has been the realisation that despite the effectiveness, in many applications, of anti-corrosion coating technology, one of the big disadvantages of using steel vessels for holding biogas is corrosion. Raw biogas is a unfortunately, a corrosive gas, containing varying amounts of hydrogen sulphide (H2S).

When the H2S in the biogas chemically combines with the water in the saturated gas, it produces weak sulphuric acid, which is particularly aggressive to steel. This can be overcome by coating the surfaces of the steel that are in contact with the gas with, for example, epoxy resin paints, which can be very effective. But, this is achieved at a high cost, and the results are never certain. Coatings do eventually become chipped, or become detached from the steel.

The modern double membrane biogas holder was developed in the 1980s, using fabrics that were developed in the architectural industry for canopies and other innovative roofs. The breakthrough came when it was realised that different fabrics could be combined in one membrane, and the development of dense PVC coatings also helped.

The development of dense PVC brought the solution to the inconvenient feature of fabrics, which was that they had previously been too gas permeable. Now combining materials produces membranes which are both effective barriers to the permeation of gas, and also very strong and long lasting, with very low maintenance costs.

What are these magic materials?

These materials are polyester based fabrics, with very high tensile strengths, coated with specialised PVC materials.

The interesting feature of a double-membrane biogas holder, such as the designs offered by gas holder manufacturer Vergas, is that the outer membrane, which is inflated by air, acts as the solid support structure.

It is the outer membrane which resists wind and snow loads, and a separate inner membrane, which actually provides the seal and support for the biogas inside.

So, in effect the structure comprises a gas-holding membrane within an air-supported outer shell. The materials are resistant to the acidic and unscrubbed gas; and are actually less expensive than steel. They are quick to manufacture and install and, more as maintenance-free as any structure can be.

The structure actually is a live structure as well though. Small fans produce an air pressure to keep the structure inflated to resist all climatic conditions, and that same air pressure is the driving force on the inner membrane, providing the motive force to push gas round the biogas system.

The operator of the plant can also make safe entry within the gas holders provided by Vergas. The company reports that it has made a point of giving the operator an easier life. Its range of gas holders provides a full sized man-access through the outer membrane into the space between the two membranes.

This means that suitably trained operators can inspect the gas holder without taking it out of service.

In addition, the availability of telemetry signals from an ultrasonic level detection system that detects the pressure level of the inner membrane, means that this modern biogas holder gives the operator a system that will give trouble free service for very many years.  The system includes a pressure level stabilisation system to control the air pump system to keep the biogas pressure inside constant while changing the air volume in the outer membrane area, and ensuring that the cover on top of the digester, or around the free-standing type, is always kept taught.

Vergas has reported that it has supplied biogas holders to many UK and overseas projects, including those for the Anglian Water Biosolids Programme at Cotton Valley, Kings Lynn, and Great Billing.

Comments

    • biogasman
    • October 5, 2017
    Reply

    We updated this article today, and added a new video to replace a video which was no longer available on YouTube.

    • M.Balasubramanian
    • October 29, 2017
    Reply

    I would like to buy a bio gas compressor( 1 m3/hr ; suction pressure : 6″ WC & delivery pressure : 50″ WC ) along with a holder. Kindly suggest the supplier of your system in south India.

      • biogasman
      • October 29, 2017
      Reply

      I am based in the United Kingdom, and I don’t work on any projects in India, so I don’t have any knowledge of suppliers in South India. I notice that there are biogas compressor suppliers in China which offer a wide range of compressor types and sizes via the AliBaba website, but I don’t know whether you would be able to buy from that website in your location.

      • biogasman
      • February 6, 2018
      Reply

      Sorry. I do not have any knowledge of suppliers in India.

    • Dr. Retna Raj
    • March 21, 2018
    Reply

    We need 1000 m3 capacity Biogas holder. Can you give the supplier of the Biogas holder in India.

      • biogasman
      • March 22, 2018
      Reply

      Dr. Retna Raj – I am sorry. I am in the UK. All I could do would be to search Google, and I think that you would get better results, assuming that you are in India at the moment.

      Good luck with your project.

    • Andy
    • August 29, 2018
    Reply

    It’s a decent web site you’ve got here.. It’s hard to find original writing these days. I truly appreciate people like you! Take care!!

    • Deepak
    • June 7, 2020
    Reply

    Very informative, hope to get more help. I work in a university and hope to help farmers manage their waste

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Advertisement Banner for Home Biogas Buddy.
17 Shares
Share
Tweet
Pin17
Share